World Encyclopedia of Cars
The best old cars, news and reviews about old cars. Stay in touch!

Büssing-N.A.G. Sd.Kfz.232

All Büssing-N.A.G. Photos

Büssing-N.A.G. Sd.Kfz.232 - information: Büssing-N.A.G. Sd.Kfz.232 is a very good car, that was released by "Büssing-N.A.G." company. We collected the best 7 photos of Büssing-N.A.G. Sd.Kfz.232 on this page.

Brand Name Büssing-N.A.G.
Model Büssing-N.A.G. Sd.Kfz.232
Number of views 52170 views
Model's Rate 9.2 out of 10
Number of images 7 images
Interesting News
  • BIG BIKE VS. SMALL BIKE.

    We see it quite often at the racetrack, especially in club races where classes are mixed: Rider on small bike passes rider on big bike in seemingly every corner, only to be passed back right away on the next straight. Even if the power difference is not that great between the two bikes, the contrast between corner speed and straightaway speed of the two bikes becomes magnified as each bike is ridden to maximize its advantages. The reality of the situation is that the outright maximum cornering speed between any two bikes is not that significantly different, provided both are on similar tires. If the tires are similar, both bikes should be capable of the same lateral acceleration (limited by the friction coefficient of the tires) and corner speed. Why do we see such a contrast in how the bikes are ridden? On an underpowered bike, the quickest way around the track is to maximize corner speed, in turn getting onto each straight with as much speed as possible. This is accomplished by completing the corner with as large an arc as possible, which converts lateral acceleration into maximum corner speed. For a typical single-radius corner, this means entering as wide as possible to maximize entry speed, turning in to the apex with little trail- braking, and keeping the bike at maximum lean with a constant radius until the very exit of the corner. In contrast, the quickest lap times on a more powerful bike are usually found by maximizing acceleration onto each straight and taking advantage of that power; this is achieved by sacrificing some corner speed to pick the bike up and apply the throttle earlier at the exit. For that same single-radius corner, this means a tighter entry, more trail-braking to a slightly later apex, with a tighter arc and less corner speed to get the bike up off the side of the tire as quickly as possible. As we found out in our displacement test last year where we compared the Yamaha YZF-R6, Suzuki GSX-R750, and Kawasaki ZX-10R, it’s not so much that the smaller bikes have a handling advantage over the bigger bikes but rather it’s how each bike is ridden to play to its strength or weakness in the power department. Using data from our AiM Solo GPS lap timer, we could see differences in line and cornering speeds between the three bikes, just as you would expect given the horsepower of each. While a few horsepower here or there might not seem like it should impact line choice signifi- cantly, in practice even a small difference can significantly change how a particular corner or series of corners is negotiated. And the contrast between a lightweight bike and a literbike can be astonishing: We’ve encountered certain corners where the entry line is several feet different on an SV650 than it is on a 1000, for an example. Finding the optimum line to match the power of your bike does require some experimentation. The wide radius and high corner speed that less powerful bikes require typically brings with it a higher risk of a high-side crash in the middle of the corner just as the throttle is opened, and the safer option is to start with the tighter entry and lower corner speed of the big-bike line and work from there, adding more corner speed and a wider entry with practice. If you are looking at sector times on data, don’t forget to factor in any time gained or lost on the succeeding straight, which may or may not offset time saved in the corner itself. Given the contrast in lines between different bikes, the key point to remember is that the optimum line for your bike may be very different from the bike in front of you, and it’s quite often a mistake to blindly follow another rider at the track. Even if you are riding the same model of bike, the power difference may be enough that you can take advantage of a different line to be quicker, and that line may work to a further advantage when it comes time to make a pass. When you ride at the track, what bike you are on will at least in part determine what lines you should be taking, and you should try different options with that in mind. And if you change bikes and move to a more or less powerful machine- or even make modifications to the same bike for more power-know that the lines you had been using for years might need to be altered appropriately.
  • Gen Ze 2.0.

    Equipped with a 1.6-kWh extractable Lithium-Ion battery, the GenZe 2.0 is a zero-emission urban micro-vehicle. Provided with a range of 45 to 50 km and dynamic braking, it goes from 0 to 45 km/h in less than eight seconds thanks to its immediate torque of 130 Nm.
  • DS AUTOMOBILES news.

    Following the launch of the uprated DS 5 earlier this year, a new, smaller capacity automatic model has been added to the line-up, and featuring the 118bhp 1.6-litre BlueHDi engine. Paired exclusively to Elegance trim, the newcomer costs Ј27,180 and represents a price premium of Ј1,200 compared to the manual gearbox car. Fitted with a six-speed torque-converter equipped automatic transmission, it emits 108g/km of CO2 and is capable of 68.9mpg at optimum conditions on the combined fuel economy cycle. The new two-pedal version of the DS 5 is ready for customers to order now.
Top Büssing-N.A.G. models
Popular Searches
World Encyclopedia of Cars
Copyright 2015. All rights under protection.