World Encyclopedia of Cars
The best old cars, news and reviews about old cars. Stay in touch!

Caterham Roadsport SV

All Caterham Photos

Caterham Roadsport SV - information: Caterham Roadsport SV is a very good car, that was released by "Caterham" company. We collected the best 12 photos of Caterham Roadsport SV on this page.

Brand Name Caterham
Model Caterham Roadsport SV
Number of views 86808 views
Model's Rate 8.4 out of 10
Number of images 12 images
Interesting News
  • MAZDA news.

    Already installed under the bonnets of the Mazda2 and CX-3, the Japanese firm has now begun selling versions of the Mazda3 with the 103bhp 1.5-litre diesel engine. For the first time, Mazda’s medium-sized car is capable of emitting less than 100g/km of CO2, with the new powerplant achieving 74.3mpg and emissions of just 99g/km. It’s offered with both five-door hatchback and four-door Fastback bodystyles, and the choice of manual or automatic transmission - the latter exclusive to hatchback editions. The new engine is capable of achieving a maximum speed of 116mph and accelerates to 62mph in 11.0 seconds. Maximum torque of 199lb ft is produced between 1,600 and 2,500rpm. Available in each of the five trim levels - SE, SE Nav, SE-L, SE-L Nav and Sport Nav - prices start at Ј18,895 for the SE 1.5-litre diesel hatchback and Fastback, while the flagship of the line-up, the Sport Nav 1.5 diesel automatic hatchback is priced at Ј23,145. On sale since 1st December, the first examples are arriving in UK showrooms about now.
  • NEW 2016 KAWASAKI ZX-10R.

    With World Superbike regulations becoming ever stricter with regard to modifications, manufacturers have to make sure their production models already have the proper pieces in place. And after winning two World Superbike championships in the past three years, Kawasaki shows that it’s serious about staying at the top of the superbike heap with its all-new 2016 ZX-10R. All of the extensive updates to Team Green’s new literbike were gleaned from lessons learned in WSBK competition and intended to make sure the factory team has a solid base to start from for the coming season. Engine Other than the previous engine’s bore and stroke, there’s little carried over between the old and new ZX-10R. The new crankshaft is lighter for quicker response and improved handling, with a correspondingly lighter balance shaft and rod journals that have a new coating for reduced friction at higher rpm. New 5-gram-lighter pistons, cams with more overlap, and a new airbox (25 percent more volume and air filter with 60 percent more surface area for better fl ow) work with an all-new cylinder head featuring reworked and polished intake and exhaust ports (previously only the intake ports were polished) plus revised combustion chambers. The titanium exhaust valves increase in size 1mm to 25.5mm, and cylinder-wall thickness was increased slightly for a more rigid engine block. The titanium alloy headers use a new heat-resistant alloy that allows thinner wall thickness for reduced weight, and the titanium exhaust canister has 50 percent more volume for better fl ow without increased sound levels. The intake portion of the frame’s steering head was modified to quell intake honk, allowing some freedom in the exhaust for more power without exceeding strict noise restrictions. The transmission remains a racing-style cassette design for quick and easy internal gearing changes. Gear ratios are closer for track use, with shorter ratios in all but first gear. The slipper clutch is 130 grams lighter, and some of the gears have dry-film lubricant coating to reduce friction. A contactless- sensor-equipped quickshifter similar to the H2R is standard, with the optional Kawasaki race ECU offering clutchless downshifts as well. Electronics The new ZX-10R utilizes a Bosch five-axis IMU with software developed in-house at Kawasaki that allows the unit to calculate yaw rate from other sensors, resulting in six-axis operation. This allows the IMU to sense changes in pavement elevation, camber, and the motorcycle’s position relative to them, as well as discern different tire profiles so that the bike is not restricted to just the OEM tires. The Sport-Kawasaki TRaction Control (S-KTRC) system now has five modes of operation instead of three as with the previous ZX-10R. Modes 1 and 2 are designed for racing, while mode 3 is for a “dry circuit with highgrip tires,” mode 4 is for “dry canyon roads or commuting,” and mode 5 is intended for wet pavement use. The Keihin 47mm throttle bodies utilize an electronic ride-by-wire throttle system to control power in addition to ignition retardation. With the Bosch IMU, Kawasaki was able to produce its own version of the cornering ABS that has seen usage on KTM and BMW motorcycles. Kawasaki’s system is called Cornering Management Function and changes braking pressure according to the bike’s lean and pitch angles to prevent it from standing up under braking in a corner. Another new addition is the Kawasaki Launch Control Mode (KLCM), with three modes available. And Kawasaki Engine Braking Control-first seen on the supercharged H2R-manages engine back-torque. Lastly, there are three selectable power modes for the new ZX-10R: Full, Middle (providing approximately 80 percent power), or Low (allowing 60 percent power). Chassis The new Ninja’s frame has also been redone, with the steering head moved rearward 7.5mm closer to the rider, while the swingarm has been lengthened 15.8mm (in addition to extra bracing for more torsional rigidity), resulting in more front weight bias. Wheelbase is now listed as 56.7 inches, almost a half inch longer than its predecessor. An all-new Showa Balance Free Fork featuring an external damping valve chamber utilizes a design similar to the ?hlins TTX/FGR concept, with the rebound and compression damping valves completely separated so that the oil only flows in one direction through the valves; in conjunction with nitrogen pressurization in the damping chamber, this keeps the pressure on both sides of the valves as consistent as possible, drastically reducing cavitation that results in inconsistent damping. The rear Showa Balance Free Rear Cushion (BFRC) shock uses the same concept in its damping valves, and the shock linkage has been revised to allow a broader range of adjustment. Brakes have also been fully upgraded, with Brembo M50 monoblock aluminum calipers with 30mm pistons biting on huge 330mm discs for awesome stopping power. A Brembo radial-action master cylinder equipped with steel-braided brake lines ensures positive and responsive feel at the lever as well as better consistency. Wheels are one of the few components that haven’t been changed, though they are now shod with Bridgestone RS10 street/track rubber in 120/70-17 front and 190/55-17 rear sizes. Bodywork has undergone some restyling, with the windscreen improved for better aerodynamics. Overall weight is claimed at 450 pounds wet with all fluids and a full tank of fuel for the non-ABS model, 454 pounds wet for the ABS model. List prices are $14,999 for the standard ZX-10R, $15,299 for the Special Edition paint, $15,999 for the ZX-10R ABS model, and $16,299 for the ZX-10R ABS with Special Edition paint scheme. How will all of these changes affect Kawasaki’s performance in World Superbike and on the showroom floor? We can’t wait to find out.
  • MAKE MINE A “SUPERMID”.

    Just as it did in 2015 with the 1299 Panigale, Ducati has upped the ante in 2016 with the smaller Panigale, giving the previous 899 the same stroke measurement as the 1299 to create the new 959 Panigale. Ducati wanted to ensure that the “supermid” Panigale kept pace with its bigger brother, so it invited the world’s motorcycling media to the Circuit de la Comunitat Valenciana Ricardo Tormo in Valencia, Spain, to let us find out. Looking at the updates, they are minimal but important, with the engine’s slight increase in stroke from 57.2mm to 60.8mm (resulting in a total displacement of 955cc) necessitating a new crankshaft and connecting rods. The piston crowns are slightly different, while strict Euro 4 noise emissions standards required the fitment of a different exhaust system with dual muffl ers on the right side (thankfully absent from US models), along with ribbing on the cylinder heads and valve covers, and a different cam chain. Exhaust diameter was increased from 55mm to 60mm, while on the intake side, the 62mm oval throttle bodies now feature dual injectors. The clutch now has the slipper/assist function from the 1299 that provides lighter lever action and smoother downshifting when riding aggressively. Meanwhile, thanks to the bike employing the same cast-aluminum monocoque two-piece frame that uses the engine as a structural member, changes on the chassis side are limited to dropping the swingarm pivot 4mm for better rear-tire grip. I had spent a couple of days on an 899 Panigale last year at Circuit of The Americas in Texas, so I had a good idea of what to compare the 959 to. It didn’t take me long to realize that the 959 has power all over the 899 regardless-and not only more of it through the rpm range but smoother power, too, with fewer dips and bumps in the powerband. Ducati claims 157 hp, an increase of 9 hp from the 899’s 148 hp at 10,500 rpm, and a torque peak of 79 foot-pounds (a massive 6 foot-pound increase over the 899) at 9,000 rpm. The same Ducati electronics suite of RbW (Ride-by-Wire), DTC (Ducati Traction Control), EBC (Engine Brake Control), DQS (Ducati Quickshift), and Bosch ABS does an excellent job of keeping everything under control. With the DTC set to Level 2 in the Race riding mode, the new 959 Panigale comes off the corners well and continues pulling hard as the rpm rises. I did find, however, that you need to exercise some care in Race mode when opening the throttle midcorner, as the 959’s increased and more responsive torque can come on a little abruptly. If anything, it’s more of an annoyance, really, and it’s very manageable; you just have to be aware of it. The Sport mode throttle response is softer (with the rain-intended Wet mode softer still) and perhaps a little too soft for the track, which is why I left it in Race mode for the majority of my laps. Setting the EBC at Level 1 (the least enginebraking) with the slipper clutch was a big help under braking, allowing the rear end to step out just enough while hammering downshifts to aid but not interfere with corner entry. And speaking of braking, the feel and control provided by the Brembo M4.32 monoblock calipers and 320mm discs were outstanding, allowing trail braking deep into the corner without issues. The fully adjustable Showa 43mm Big Piston Fork offered a very solid feel in all conditions, and while the fully adjustable Sachs rear shock performed admirably, I was wishing for a slightly stiffer spring in the back to counter some squatting under acceleration. Midcorner stability was rock-solid, and although initial turn-in at speed took some effort (a likely by-product of the rear-end squat), overall steering habits were light and agile- the 959’s 430-pound wet weight surely helping matters here. The taller and wider windscreen definitely helps keep the windblast off you down long front straights better than its comparatively skimpy predecessor. And you can move around easily on the bike, aided by the same knurled footpegs found on the 1299 that grip your boots far better than the previously useless pegs found on generations of Ducatis that were only good to rest your feet on when cruising in a straight line. All told, boosting the displacement and adding subtle tweaks to its “Supermid” superquadro engine has yielded great results with the new 959 Panigale. This is the type of bike you can really feel like you’re squeezing all the potential out of, instead of the 1299 Panigale where at times you feel like you’re only along for the ride. Yeah, calling a bike with a 955cc engine a midsize machine is a bit of a stretch, but after a ride on the 959 Panigale, you probably won’t care one bit.
Top Caterham models
Popular Searches
World Encyclopedia of Cars
Copyright 2015. All rights under protection.