World Encyclopedia of Cars
The best old cars, news and reviews about old cars. Stay in touch!

FAMSA SF2500

All Famsa Photos

FAMSA SF2500 - information: FAMSA SF2500 is a very good car, that was released by "Famsa" company. We collected the best 6 photos of FAMSA SF2500 on this page.

Brand Name FAMSA
Model FAMSA SF2500
Number of views 51783 views
Model's Rate 8.4 out of 10
Number of images 6 images
Interesting News
  • Audi’s electrified future.

    The introduction of mild hybrids to Audi’s model range is set to edge efficiency ever closer to the kind of economy figures enjoyed by TDI owners. But it doesn’t mean the death of the diesel engine, as the introduction of cutting edge technology can be paired to both TDI diesel and TFSI petrol engines. Audi says that within ten years, its entire model range will feature the technology. The key elements of the new system are an 11 Ah capacity lithium-ion battery pack and belt starter generator, with the latter replacing the current starter motor. Coasting becomes possible from around 9mph upwards, so that if the driver takes their foot off the accelerator, the car will coast along for a short time with the engine off, saving fuel. It’s possible to recuperate up to 5kW (7bhp), with the generator returning that power, reducing fuel usage and boosting economy as a result. And while this system can be integrated into current 12-volt systems, Audi is on the verge of announcing that it will put a new 48-volt system into production, with a capacity of harnessing 12kW (16bhp), that will allow coasting for up to 30 seconds, delivering even better efficiency compared to the 12-volt system. The company first gave a glimpse at the technology in the Prologue Concept car last year at the Los Angeles motor show. Other benefits of the introduction of a 48-volt electrical system includes the ability to have much smaller cable cross sections, reducing the weight of the wiring harness, and because it has four times the power, there’s opportunities to add additional innovative technology for the suspension and drivetrain. Further into the future, Audi’s engineers plan to convert the auxiliary systems, like pumps, superchargers for the engine, transmission and air conditioning system to 48 volts. Today these are driven hydraulically or by the engine, but in the future they will be powered by electricity and lighter and more compact. Audi will soon announce an electromechanical active roll stabilisation system, which features an electric motor and a three-stage planetary gearbox that separates the two halves of the stabiliser from each other. For relaxed and comfortable driving, the two halves are decoupled, resulting in cossetting ride comfort. For the sportier driver, the tubes are interconnected and twist against each other, delivering a tauter, more dynamic ride, and less roll when cornering. The front and rear stabilisers can also be adjusted independently allowing even greater degrees of fine tuning. The system is also capable of harnessing energy, and the motor can act as a generator, converting it to electrical energy. But Audi’s engineers are already looking at a second, more advanced project using the 48-volt setup, though it is still in the very early prototype stage. Being developed under the working title of eROT, an electromechanical rotary damper replaces today’s hydraulic item. The system isn’t too far apart from the active roll stabilisation arrangement in terms of basic principles, but a strong lever arm absorbs all of the forces that occur on a bumpy road, and via a series of gears, the force is transmitted into an electric motor, which then converts it to electricity. Recuperation is, on average, around 150 watts on an average road, with a freshly resurfaced road generating as little as 3 watts, while a badly maintained country lane may generate as much as 613 watts. Over a cross section of different roads, CO2 emissions savings could be as much as 3g/ km or four to five mpg.
  • REAL-LIFE MONSTER.

    The difference in the Ducati engineer’s tone is almost so dramatic that I can’t believe he’s talking about what outwardly appears to be a very similar bike. Last year, I was on hand for the introduction of the Ducati Monster 1200 S, and Ducati’s technical team was using words like “usability,” while going on to say things like, “We want the Monster 1200 to offer greater comfort and accessibility to both rider and passenger.” Today, at the Ascari Race Resort in Malaga, Spain, the same team has done a near complete 180 and is talking about things like added ground clearance for better lean angle and quicker lap times. Such is the goal with Ducati’s new Monster 1200 R… The R utilizes a Testastretta 11° engine similar to that in the 1200 S, only this one uses a thinner head gasket to bump compression ratio up to 13:1 and is paired to larger elliptical throttle bodies with an equivalent diameter of 56mm (versus 53mm on the 1200), plus larger, 58mm-diameter exhaust pipes. Together, these changes bump power output to a claimed 160 hp at 9,250 rpm and torque from 91.8 foot-pounds at 7,250 rpm to 97 foot-pounds at 7,750 rpm. To help the R meet strict Euro 4 emissions standards, Ducati is also using a new material on the piston to reduce leak and has added material to the clutch cover to reduce mechanical noise from the oil pump. Despite the weighty updates, Ducati has actually managed to reduce the claimed curb weight of the R by almost 5 pounds, to 456 pounds, a drop aided by new forged aluminum wheels. For better handling, the 1200 R’s fully adjustable ?hlins suspension has been lengthened (this increases cornering clearance and raises the bike’s center of gravity for lighter handling) as well as re-damped. The effect on geometry is minimal, with the R having just a 2mm-shorter wheelbase (1,509mm versus 1,511mm on the S) and 4.2mm less trail (89mm versus 93.2 on the S). Electronics are the same as they are on the Monster 1200, which is to say the bike has the same three riding modes (Sport, Touring, and Urban) that can be customized via three varying power modes, three-level ABS, and eight-level DTC. All of these settings continue to be adjusted via a switch on the left side of the handlebar and through the Monster’s dash, which now has a gear position indicator. In all situations except for when the sun is directly behind you, all of the bike’s electronic settings are clearly visible. But damn that sun… Additional updates for the R include an ?hlins steering damper, larger 200/55-17 Pirelli Supercorsa SP rear tire (instead of Pirelli Diablo Rosso II rubber), and separate rider/passenger footpeg brackets, the former holding pegs that are machined for better grip and live on an extremely short list of Ducati footpegs that we like (and actually work to keep your feet on the pegs during aggressive riding). Throw a leg over the bike and you’ll notice right away the effects of the new seat and taller suspension, which together bring the seat height from 31.9 inches max on the Monster 1200 S to a nonadjustable 32.7 inches on the 1200 R. While that number doesn’t seem skyscraper high, it’s defi- nitely worth keeping in mind if your parents didn’t grace you with long legs; at 6-foot-3 I could fl at-foot no problem, but my legs were definitely straighter than they would be on similar bikes. The R’s handling makes the bike feel surprisingly at home at the track (and will likely do the same on a twisting canyon road). Even with the larger 200-section rear tire out back, the bike steers into a corner lighter than the standard 1200 and through a transition quicker thanks to the higher center of gravity (and forged wheels, we’re sure). On top of that, when it’s on its side, the re-damped R feels more planted and composed than ever before. I am generally not a huge fan of naked bikes on the track, as the wider handlebar paired to streetsoft suspension typically causes those bikes to move around quite a bit through all parts of the corner, yet with the R there’s relatively none of that unwanted movement, even as the pace picks up. At the other end of a straight, the 1200 R continues to stand out with great braking power from the M50 monoblock calipers and a good feel through the chassis as you bank into the corner; again, not something you get from most street-biased naked bikes. Compare dyno charts between the Monster 1200 R and the 1200 S and you’ll notice that the bikes make about the same power most everywhere below 7,000 rpm. So, similar to the S, the R makes good power off the bottom and can be run in a gear higher than you’d expect in tighter sections of road, the obvious benefit being less shifting over the course of a ride or session at the track. Past 7,000 rpm, the R’s engine starts to pull a bit harder and doesn’t feel like it goes fl at as you close in on the rev limiter. For some, that added liveliness will be the punch to the adrenal glands that the S simply couldn’t give. But there’s more to the engine than a little extra performance up top, as when Ducati engineers mounted the larger throttle bodies they also went through and fine-tuned the parameters for the new Synerject-Continental fuel-injection system. The result is near seamless fueling almost right off the bottom. Whether you’re riding stoplight to stoplight or going to crack the throttle open in the middle of a corner, this has obvious advantages in that it makes the bike less work to ride or stay on top of. And overall, that’s what the Monster 1200 R feels like to me: an easier bike to ride. Sure, it’s a bit faster, but more importantly it’s lighter on its toes and more composed when ridden aggressively. Add in electronic rider aids like traction control and ABS that can be easily tailored to provide as much support as you need (and without being overly intrusive) and you have a bike that’s surprisingly well suited for track riding. Now, there’s something I probably wouldn’t have said about the standard Monster 1200.
  • NORTON FLAT TRACK.

    This modern Norton dirt track custom is the work of Jamie Ireson’s 72Motorcycles, in collaboration with Norton Motorcycles - a tribute to the 1970s RonWood racing machine that won three Ascot track championship titles and was taken to a National dirt track victory by Alex Jorgenson. Based on a newCommando 961, it was recently launched at Motorcycle Live on the official NortonMotorcycles stand as the first of a limited edition run of 12. Ireson said: “The project started whenmy partnerMerryMichau photographed the 2014 Norton brochure. She toldNorton CEO Stuart Garner that I build custombikes and it went from there. Stuart asked us to come up with some ideas and it turned out that we had the same thoughts on building a custombike based on RonWood’s dirt tracker. Ireson is a design engineer by trade and used his experience gained in the automotive industry to model the bike in CAD before committing to metal. “The one thing we needed to do was lower the bike, and working in CAD with models that Norton supplied allowedme to see what effect that had.” That was November 2014 but it took until June 2015 for the project to take off. “Norton sent me a rolling chassis and engine unit with the only stipulation being that the bike had to be ready forMotorcycle Live at the NEC,” says Jamie. The engine and transmission are standard 961, as is the main frame, but Jamie modified the rear end. He says: “The RonWood bike has a really small oil tank, because it’s designed to only do a small number of laps. I cut off the end off the original tank, made up some bends on a CNCmachine and got themwelded up to follow the lines of Ron Wood’s [oil-carrying] frame.” According to Jamie, the standard Norton chassis geometry is slap bang in the middle of what is considered an ideal flat track set-up, but this build had to retain the standard 17in wheels. The swingarm is also standard, but with added bracing. The standard Ohlins forks were too long so Jamie opted for shorter, larger-diameter 58mm Ducati Panigale forks which slot into new yokes made from Jamie’s CAD drawings by Fastec Racing in Suffolk, who also did machining work on footpeg mounts and the velocity stacks. Jamie produced a buck for the tank, from which Parker Fabrication in Bournemouth produced the alloy tank. “The inspiration of the Ron Wood bike was the gorgeous red paintwork and tank graphics. We talked with out painters, Image Design, about giving it a modern twist, but they said it was so good we should leave it. The only change is using the current Norton logo.” The engine is standard, but Jamie’s removed the original airbox, so: “we might pick up anything between five and 10bhp.” The exhaust follows the same lines as the Ron Wood bike. It’s all custom made and hand-rolled by Tom at Foundry Motorcycles. The pipes have been given a super hard-wearing ceramic-coated black by Wes at Hi-Spec Coatings in West Sussex. Lasertech Engineering did all the frame welding. The Norton 961 MM Flat Track is priced at ?30,000. “All 12 will be identical except for the number,” says Jamie. “We’ve got 44. We’re keeping this original bike. Customers can have any number, but we won’t use one number twice.”
Top Famsa models
Popular Searches
World Encyclopedia of Cars
Copyright 2017. All rights under protection.