World Encyclopedia of Cars
The best old cars, news and reviews about old cars. Stay in touch!

Holden Belmont

All Holden Photos

Holden Belmont - information: Holden Belmont is a very good car, that was released by "Holden" company. We collected the best 11 photos of Holden Belmont on this page.

Brand Name Holden
Model Holden Belmont
Number of views 107217 views
Model's Rate 7.6 out of 10
Number of images 11 images
Interesting News
  • Citroen e-mehari ReVealed.

    Following the unveiling of the Cactus-M concept at the Frankfurt motor show last September, harking back to the original Mйhari from 1968, Citroen has revealed plans to launch a plastic bodied all-electric four-seat cabriolet called the E-Mйhari. Born out of a partnership with France’s Bollorй Group, the new car will be made at the Rennes factory in Northern France and go on sale next Spring. However, there are no plans to sell it here in the UK, with France the main target audience where there are tax breaks and incentives for these kinds of vehicles. The E-Mйhari has a top speed of 68mph, with a maximum range of approximately 125 miles. Charging takes up to 13 hours using a domestic plug socket, and because the battery pack utilises Lithium Metal Polymer (LMP) technology and are classed as ‘dry’ batteries, they aren’t weather sensitive and don’t have the range fluctuation that many modern electric cars suffer with during harsher weather conditions.
  • NORTON FLAT TRACK.

    This modern Norton dirt track custom is the work of Jamie Ireson’s 72Motorcycles, in collaboration with Norton Motorcycles - a tribute to the 1970s RonWood racing machine that won three Ascot track championship titles and was taken to a National dirt track victory by Alex Jorgenson. Based on a newCommando 961, it was recently launched at Motorcycle Live on the official NortonMotorcycles stand as the first of a limited edition run of 12. Ireson said: “The project started whenmy partnerMerryMichau photographed the 2014 Norton brochure. She toldNorton CEO Stuart Garner that I build custombikes and it went from there. Stuart asked us to come up with some ideas and it turned out that we had the same thoughts on building a custombike based on RonWood’s dirt tracker. Ireson is a design engineer by trade and used his experience gained in the automotive industry to model the bike in CAD before committing to metal. “The one thing we needed to do was lower the bike, and working in CAD with models that Norton supplied allowedme to see what effect that had.” That was November 2014 but it took until June 2015 for the project to take off. “Norton sent me a rolling chassis and engine unit with the only stipulation being that the bike had to be ready forMotorcycle Live at the NEC,” says Jamie. The engine and transmission are standard 961, as is the main frame, but Jamie modified the rear end. He says: “The RonWood bike has a really small oil tank, because it’s designed to only do a small number of laps. I cut off the end off the original tank, made up some bends on a CNCmachine and got themwelded up to follow the lines of Ron Wood’s [oil-carrying] frame.” According to Jamie, the standard Norton chassis geometry is slap bang in the middle of what is considered an ideal flat track set-up, but this build had to retain the standard 17in wheels. The swingarm is also standard, but with added bracing. The standard Ohlins forks were too long so Jamie opted for shorter, larger-diameter 58mm Ducati Panigale forks which slot into new yokes made from Jamie’s CAD drawings by Fastec Racing in Suffolk, who also did machining work on footpeg mounts and the velocity stacks. Jamie produced a buck for the tank, from which Parker Fabrication in Bournemouth produced the alloy tank. “The inspiration of the Ron Wood bike was the gorgeous red paintwork and tank graphics. We talked with out painters, Image Design, about giving it a modern twist, but they said it was so good we should leave it. The only change is using the current Norton logo.” The engine is standard, but Jamie’s removed the original airbox, so: “we might pick up anything between five and 10bhp.” The exhaust follows the same lines as the Ron Wood bike. It’s all custom made and hand-rolled by Tom at Foundry Motorcycles. The pipes have been given a super hard-wearing ceramic-coated black by Wes at Hi-Spec Coatings in West Sussex. Lasertech Engineering did all the frame welding. The Norton 961 MM Flat Track is priced at ?30,000. “All 12 will be identical except for the number,” says Jamie. “We’ve got 44. We’re keeping this original bike. Customers can have any number, but we won’t use one number twice.”
  • 2016 DUCATIS.

    Ducati has unveiled its updated Hypermotard and Scrambler lines for 2016. The Hypermotard models receive larger engines that are more powerful and meet strict Euro 4 emissions standards, while the Scrambler line expands with the addition of a Flat Track Pro version and the 399cc Sixty2. The company also introduced an updated “Supermid” 959 Panigale, which you can read about elsewhere in this issue. The three models in the Hypermotard lineup-the base Hypermotard, the SP, and the Hyperstrada-receive a larger engine that also meets stringent Euro 4 emissions standards. Bore has been increased from 88mm to 94mm, with a corresponding increase in displacement to 937cc, this despite the models now being referred to as the Hypermotard 939 and Hyperstrada 939. Other updates include an increased compression ratio (from 12.8:1 to 13.1:1) and a redesigned 2-into-1 exhaust system. Maximum power is now 113 hp (slightly up from the previous model’s 110 hp), and torque is up by 10 percent. The Hypermotard’s chassis is unchanged from the previous model, and other features such as the Ducati Safety Pack, three-level ABS, traction control, and riding modes all carry over. In the Scrambler line, the four versions produced last year carry on and are joined by the Flat Track Pro, which is based on the Full Throttle but has side-mounted number plates, a small-nose fairing, and other Ducati accessories such as machined footpegs. As with the Full Throttle, the Flat Track Pro has a Termignoni exhaust as standard. The Sixty2 is a more affordable Scrambler, with a smaller engine derived from the 803cc mill producing 41 hp, which Ducati says will make the bike more accessible for newer riders. The Sixty2 has slightly different brakes and suspension, helping to lower cost to $7,995. The Multistrada 1200 Pikes Peak returns for 2016 after a year off, and the Multistrada line expands further with a more dirt-oriented Enduro model. The Diavel line also grows, with cruiser versions dubbed the XDiavel and XDiavel S added.
Top Holden models
Popular Searches
World Encyclopedia of Cars
Copyright 2015. All rights under protection.