World Encyclopedia of Cars
The best old cars, news and reviews about old cars. Stay in touch!

Hymer Hymermobil 564

All Hymer Photos

Hymer Hymermobil 564 - information: Hymer Hymermobil 564 is a very good car, that was released by "Hymer" company. We collected the best 5 photos of Hymer Hymermobil 564 on this page.

Brand Name Hymer
Model Hymer Hymermobil 564
Number of views 47656 views
Model's Rate 8.3 out of 10
Number of images 5 images
Interesting News
  • Holden’s secret project.

    MEET the top-secret show-stopper that started life in Holden’s Port Melbourne design studios in the middle of 2015. The eye-catching Opel GT Concept, which is shaping up to be one of the stars of the Geneva motor show (March 3-13), was designed in Europe but is a product of Holden’s secret fabrication group, one of only two in the General Motors world that can create one-off show stars. The radical two-door coupe sits on a unique rear-drive platform that gives it the driver-focused nous to take on the COTY-winning Mazda MX-5 and 2012 winners the Toyota 86/Subaru BRZ twins. Described as a “template for future sports cars”, the GT Concept from GM’s European brands is targeted to weigh less than 1000kg. It’s built on a bespoke reardrive platform and uses GM’s new all-aluminium 1.0-litre three-cylinder turbocharged petrol engine, producing 107kW and 205Nm. It drives through a sixspeed sequential gearbox and accelerates to 100km/h in “under eight seconds” on the way to a maximum of 215km/h. The unusual styling is described by GM Europe design chief Mark Adams as “purebred, pared down, yet unashamedly avant-garde”. “It is dramatic, sculptural and full of innovations, which is our great tradition that we intend to continue,” Adams said. “In the mid-60s Vauxhall and Opel created their own interpretations of a lightweight sports car - the XVR and the Experimental GT - both of which were thoroughly modern with dynamic sculptural form.” While a rear-drive platform under the concept would be crucial to the production GT’s ability to battle rivals like the Toyota 86 and Mazda MX-5, GM Europe sources say it’s unlikely, and that the Barina/Corsa FWD architecture makes more business sense. The company hopes to gather more market intelligence after the GT is unveiled at the Geneva show. One insider said the GT Concept shows the company’s direction: “Like the new (European) Astra, this car continues with the theme of making a car that is no bigger than it needs to be. One that is pared-down, light and no more complex than necessary.” As for a Holden version of the production car? It’s possible, especially if the GT gets the green light for sale in the UK. But the little concept car that Australia built still has a number of gates to clear before those negotiations can take place.
  • Audi’s electrified future.

    The introduction of mild hybrids to Audi’s model range is set to edge efficiency ever closer to the kind of economy figures enjoyed by TDI owners. But it doesn’t mean the death of the diesel engine, as the introduction of cutting edge technology can be paired to both TDI diesel and TFSI petrol engines. Audi says that within ten years, its entire model range will feature the technology. The key elements of the new system are an 11 Ah capacity lithium-ion battery pack and belt starter generator, with the latter replacing the current starter motor. Coasting becomes possible from around 9mph upwards, so that if the driver takes their foot off the accelerator, the car will coast along for a short time with the engine off, saving fuel. It’s possible to recuperate up to 5kW (7bhp), with the generator returning that power, reducing fuel usage and boosting economy as a result. And while this system can be integrated into current 12-volt systems, Audi is on the verge of announcing that it will put a new 48-volt system into production, with a capacity of harnessing 12kW (16bhp), that will allow coasting for up to 30 seconds, delivering even better efficiency compared to the 12-volt system. The company first gave a glimpse at the technology in the Prologue Concept car last year at the Los Angeles motor show. Other benefits of the introduction of a 48-volt electrical system includes the ability to have much smaller cable cross sections, reducing the weight of the wiring harness, and because it has four times the power, there’s opportunities to add additional innovative technology for the suspension and drivetrain. Further into the future, Audi’s engineers plan to convert the auxiliary systems, like pumps, superchargers for the engine, transmission and air conditioning system to 48 volts. Today these are driven hydraulically or by the engine, but in the future they will be powered by electricity and lighter and more compact. Audi will soon announce an electromechanical active roll stabilisation system, which features an electric motor and a three-stage planetary gearbox that separates the two halves of the stabiliser from each other. For relaxed and comfortable driving, the two halves are decoupled, resulting in cossetting ride comfort. For the sportier driver, the tubes are interconnected and twist against each other, delivering a tauter, more dynamic ride, and less roll when cornering. The front and rear stabilisers can also be adjusted independently allowing even greater degrees of fine tuning. The system is also capable of harnessing energy, and the motor can act as a generator, converting it to electrical energy. But Audi’s engineers are already looking at a second, more advanced project using the 48-volt setup, though it is still in the very early prototype stage. Being developed under the working title of eROT, an electromechanical rotary damper replaces today’s hydraulic item. The system isn’t too far apart from the active roll stabilisation arrangement in terms of basic principles, but a strong lever arm absorbs all of the forces that occur on a bumpy road, and via a series of gears, the force is transmitted into an electric motor, which then converts it to electricity. Recuperation is, on average, around 150 watts on an average road, with a freshly resurfaced road generating as little as 3 watts, while a badly maintained country lane may generate as much as 613 watts. Over a cross section of different roads, CO2 emissions savings could be as much as 3g/ km or four to five mpg.
  • NORTON FLAT TRACK.

    This modern Norton dirt track custom is the work of Jamie Ireson’s 72Motorcycles, in collaboration with Norton Motorcycles - a tribute to the 1970s RonWood racing machine that won three Ascot track championship titles and was taken to a National dirt track victory by Alex Jorgenson. Based on a newCommando 961, it was recently launched at Motorcycle Live on the official NortonMotorcycles stand as the first of a limited edition run of 12. Ireson said: “The project started whenmy partnerMerryMichau photographed the 2014 Norton brochure. She toldNorton CEO Stuart Garner that I build custombikes and it went from there. Stuart asked us to come up with some ideas and it turned out that we had the same thoughts on building a custombike based on RonWood’s dirt tracker. Ireson is a design engineer by trade and used his experience gained in the automotive industry to model the bike in CAD before committing to metal. “The one thing we needed to do was lower the bike, and working in CAD with models that Norton supplied allowedme to see what effect that had.” That was November 2014 but it took until June 2015 for the project to take off. “Norton sent me a rolling chassis and engine unit with the only stipulation being that the bike had to be ready forMotorcycle Live at the NEC,” says Jamie. The engine and transmission are standard 961, as is the main frame, but Jamie modified the rear end. He says: “The RonWood bike has a really small oil tank, because it’s designed to only do a small number of laps. I cut off the end off the original tank, made up some bends on a CNCmachine and got themwelded up to follow the lines of Ron Wood’s [oil-carrying] frame.” According to Jamie, the standard Norton chassis geometry is slap bang in the middle of what is considered an ideal flat track set-up, but this build had to retain the standard 17in wheels. The swingarm is also standard, but with added bracing. The standard Ohlins forks were too long so Jamie opted for shorter, larger-diameter 58mm Ducati Panigale forks which slot into new yokes made from Jamie’s CAD drawings by Fastec Racing in Suffolk, who also did machining work on footpeg mounts and the velocity stacks. Jamie produced a buck for the tank, from which Parker Fabrication in Bournemouth produced the alloy tank. “The inspiration of the Ron Wood bike was the gorgeous red paintwork and tank graphics. We talked with out painters, Image Design, about giving it a modern twist, but they said it was so good we should leave it. The only change is using the current Norton logo.” The engine is standard, but Jamie’s removed the original airbox, so: “we might pick up anything between five and 10bhp.” The exhaust follows the same lines as the Ron Wood bike. It’s all custom made and hand-rolled by Tom at Foundry Motorcycles. The pipes have been given a super hard-wearing ceramic-coated black by Wes at Hi-Spec Coatings in West Sussex. Lasertech Engineering did all the frame welding. The Norton 961 MM Flat Track is priced at ?30,000. “All 12 will be identical except for the number,” says Jamie. “We’ve got 44. We’re keeping this original bike. Customers can have any number, but we won’t use one number twice.”
Top Hymer models
Popular Searches
World Encyclopedia of Cars
Copyright 2015. All rights under protection.