World Encyclopedia of Cars
The best old cars, news and reviews about old cars. Stay in touch!

Ingersoll-Rand ECM-690

All Ingersoll-Rand Photos

Ingersoll-Rand ECM-690 - information: Ingersoll-Rand ECM-690 is a very good car, that was released by "Ingersoll-Rand" company. We collected the best 9 photos of Ingersoll-Rand ECM-690 on this page.

Brand Name Ingersoll-Rand
Model Ingersoll-Rand ECM-690
Number of views 16579 views
Model's Rate 7.5 out of 10
Number of images 9 images
Interesting News
  • J125.

    The J125 is Kawasaki’s second scooter for the European market after the introduction of the J300 in 2014. Created in partnership with Kymco, the J125 features a deeply padded seat, “twist-and-go” CVT transmission, electric starting, fuel injection and water-cooling.
  • NEW 2016 KAWASAKI ZX-10R.

    With World Superbike regulations becoming ever stricter with regard to modifications, manufacturers have to make sure their production models already have the proper pieces in place. And after winning two World Superbike championships in the past three years, Kawasaki shows that it’s serious about staying at the top of the superbike heap with its all-new 2016 ZX-10R. All of the extensive updates to Team Green’s new literbike were gleaned from lessons learned in WSBK competition and intended to make sure the factory team has a solid base to start from for the coming season. Engine Other than the previous engine’s bore and stroke, there’s little carried over between the old and new ZX-10R. The new crankshaft is lighter for quicker response and improved handling, with a correspondingly lighter balance shaft and rod journals that have a new coating for reduced friction at higher rpm. New 5-gram-lighter pistons, cams with more overlap, and a new airbox (25 percent more volume and air filter with 60 percent more surface area for better fl ow) work with an all-new cylinder head featuring reworked and polished intake and exhaust ports (previously only the intake ports were polished) plus revised combustion chambers. The titanium exhaust valves increase in size 1mm to 25.5mm, and cylinder-wall thickness was increased slightly for a more rigid engine block. The titanium alloy headers use a new heat-resistant alloy that allows thinner wall thickness for reduced weight, and the titanium exhaust canister has 50 percent more volume for better fl ow without increased sound levels. The intake portion of the frame’s steering head was modified to quell intake honk, allowing some freedom in the exhaust for more power without exceeding strict noise restrictions. The transmission remains a racing-style cassette design for quick and easy internal gearing changes. Gear ratios are closer for track use, with shorter ratios in all but first gear. The slipper clutch is 130 grams lighter, and some of the gears have dry-film lubricant coating to reduce friction. A contactless- sensor-equipped quickshifter similar to the H2R is standard, with the optional Kawasaki race ECU offering clutchless downshifts as well. Electronics The new ZX-10R utilizes a Bosch five-axis IMU with software developed in-house at Kawasaki that allows the unit to calculate yaw rate from other sensors, resulting in six-axis operation. This allows the IMU to sense changes in pavement elevation, camber, and the motorcycle’s position relative to them, as well as discern different tire profiles so that the bike is not restricted to just the OEM tires. The Sport-Kawasaki TRaction Control (S-KTRC) system now has five modes of operation instead of three as with the previous ZX-10R. Modes 1 and 2 are designed for racing, while mode 3 is for a “dry circuit with highgrip tires,” mode 4 is for “dry canyon roads or commuting,” and mode 5 is intended for wet pavement use. The Keihin 47mm throttle bodies utilize an electronic ride-by-wire throttle system to control power in addition to ignition retardation. With the Bosch IMU, Kawasaki was able to produce its own version of the cornering ABS that has seen usage on KTM and BMW motorcycles. Kawasaki’s system is called Cornering Management Function and changes braking pressure according to the bike’s lean and pitch angles to prevent it from standing up under braking in a corner. Another new addition is the Kawasaki Launch Control Mode (KLCM), with three modes available. And Kawasaki Engine Braking Control-first seen on the supercharged H2R-manages engine back-torque. Lastly, there are three selectable power modes for the new ZX-10R: Full, Middle (providing approximately 80 percent power), or Low (allowing 60 percent power). Chassis The new Ninja’s frame has also been redone, with the steering head moved rearward 7.5mm closer to the rider, while the swingarm has been lengthened 15.8mm (in addition to extra bracing for more torsional rigidity), resulting in more front weight bias. Wheelbase is now listed as 56.7 inches, almost a half inch longer than its predecessor. An all-new Showa Balance Free Fork featuring an external damping valve chamber utilizes a design similar to the ?hlins TTX/FGR concept, with the rebound and compression damping valves completely separated so that the oil only flows in one direction through the valves; in conjunction with nitrogen pressurization in the damping chamber, this keeps the pressure on both sides of the valves as consistent as possible, drastically reducing cavitation that results in inconsistent damping. The rear Showa Balance Free Rear Cushion (BFRC) shock uses the same concept in its damping valves, and the shock linkage has been revised to allow a broader range of adjustment. Brakes have also been fully upgraded, with Brembo M50 monoblock aluminum calipers with 30mm pistons biting on huge 330mm discs for awesome stopping power. A Brembo radial-action master cylinder equipped with steel-braided brake lines ensures positive and responsive feel at the lever as well as better consistency. Wheels are one of the few components that haven’t been changed, though they are now shod with Bridgestone RS10 street/track rubber in 120/70-17 front and 190/55-17 rear sizes. Bodywork has undergone some restyling, with the windscreen improved for better aerodynamics. Overall weight is claimed at 450 pounds wet with all fluids and a full tank of fuel for the non-ABS model, 454 pounds wet for the ABS model. List prices are $14,999 for the standard ZX-10R, $15,299 for the Special Edition paint, $15,999 for the ZX-10R ABS model, and $16,299 for the ZX-10R ABS with Special Edition paint scheme. How will all of these changes affect Kawasaki’s performance in World Superbike and on the showroom floor? We can’t wait to find out.
  • GSX-R 1000.

    Eleven years after the launch of the GSX-R1000 K5, Suzuki finally revealed a brand-new GSX-R1000 L7 at EICMA 2015. According to the Japanese bike-makers, this new GSX-R1000 is the lightest, most powerful and best handling Gixxer they’ve ever made, which, if true, is extremely exciting since the previous Gixxer was already a very capable motorcycle. Highlights of the new GSX-R1000 include an all-new chassis, an all-new 999-cc engine with 200 PS on tap, bidirectional quickshifter, a 10-level traction control and Showa suspension. We expect the to make its way to our shores sooner or later. Are you listening, Suzuki India?
Top Ingersoll-Rand models
Popular Searches
World Encyclopedia of Cars
Copyright 2015. All rights under protection.