World Encyclopedia of Cars
The best old cars, news and reviews about old cars. Stay in touch!

LTI TX4

All LTI Photos

LTI TX4 - information: LTI TX4 is a very good car, that was released by "LTI" company. We collected the best 11 photos of LTI TX4 on this page.

Brand Name LTI
Model LTI TX4
Number of views 119409 views
Model's Rate 9.3 out of 10
Number of images 11 images
Interesting News
  • MAZDA news.

    Already installed under the bonnets of the Mazda2 and CX-3, the Japanese firm has now begun selling versions of the Mazda3 with the 103bhp 1.5-litre diesel engine. For the first time, Mazda’s medium-sized car is capable of emitting less than 100g/km of CO2, with the new powerplant achieving 74.3mpg and emissions of just 99g/km. It’s offered with both five-door hatchback and four-door Fastback bodystyles, and the choice of manual or automatic transmission - the latter exclusive to hatchback editions. The new engine is capable of achieving a maximum speed of 116mph and accelerates to 62mph in 11.0 seconds. Maximum torque of 199lb ft is produced between 1,600 and 2,500rpm. Available in each of the five trim levels - SE, SE Nav, SE-L, SE-L Nav and Sport Nav - prices start at Ј18,895 for the SE 1.5-litre diesel hatchback and Fastback, while the flagship of the line-up, the Sport Nav 1.5 diesel automatic hatchback is priced at Ј23,145. On sale since 1st December, the first examples are arriving in UK showrooms about now.
  • Seinfeld Porsches to auction at Amelia Island.

    Gooding & Co has pulled off something of a coup with the news the esteemed US auction house has been chosen to put 16 Porsches from the famous Jerry Seinfeld Collection under the hammer at the Amelia Island sale on 11 March. Comedian, Seinfeld is one of the most well known Porsche collectors in the world, however, the exact details regarding the cars in his collection (rumoured to be around 50-strong) have, until now, remained relatively secret. Among the Zuffenhausen metal on offer from the Seinfeld Collection, which includes a 1955 550 Spyder (expected to realise Ј3.4-4.1 million), a 917/30 and a Carrera GT prototype, there are a number of significant Porsche 911s set for the sale at Amelia Island. From Total 911’s perspective, the most interesting of these from the comedian’s consignment is the genuine 1974 911 3.0-litre IROC RSR, complete with a Ј830,000-Ј1 million estimate. Chassis 911 460 0016 was the first RSR chassis built for the inaugural International Race of Champions and was driven to third place in the first race at the Riverside Raceway by American F1 star, Peter Revson. The Bright yellow 911, powered by a 3.0-litre version of Porsche’s high butterfl y RSR engine, was also driven by 1973 Indy 500 winner, Gordon Johncock, and 1972 Can-Am champion, George Follmer. The incredible consignment also includes a 993 RSR Cup car and a 997 GT3 4.0 Cup Brumos Commerative Edition (a special collaboration between the esteemed dealer and Porsche Motorsport North America). On the road car front, three Porsche Speedsters catch the eye: a 1957 356A, a 3.2 Carrera and a 997 (the latter in Pure Blue), while a 964 Turbo S Flachbau will also be up for grabs. “I’ve never bought a car as an investment,” Seinfeld has explained. “I don’t really even think of myself as a collector. I just love cars. And I still love these cars. But it’s time to send some of them back into the world, for someone else to enjoy, as I have.” The Seinfeld Collection will go under the hammer at Racquet Island during the Amelia Island Concours week on Friday 11 March. Check Total911.com for updates.
  • NORTON FLAT TRACK.

    This modern Norton dirt track custom is the work of Jamie Ireson’s 72Motorcycles, in collaboration with Norton Motorcycles - a tribute to the 1970s RonWood racing machine that won three Ascot track championship titles and was taken to a National dirt track victory by Alex Jorgenson. Based on a newCommando 961, it was recently launched at Motorcycle Live on the official NortonMotorcycles stand as the first of a limited edition run of 12. Ireson said: “The project started whenmy partnerMerryMichau photographed the 2014 Norton brochure. She toldNorton CEO Stuart Garner that I build custombikes and it went from there. Stuart asked us to come up with some ideas and it turned out that we had the same thoughts on building a custombike based on RonWood’s dirt tracker. Ireson is a design engineer by trade and used his experience gained in the automotive industry to model the bike in CAD before committing to metal. “The one thing we needed to do was lower the bike, and working in CAD with models that Norton supplied allowedme to see what effect that had.” That was November 2014 but it took until June 2015 for the project to take off. “Norton sent me a rolling chassis and engine unit with the only stipulation being that the bike had to be ready forMotorcycle Live at the NEC,” says Jamie. The engine and transmission are standard 961, as is the main frame, but Jamie modified the rear end. He says: “The RonWood bike has a really small oil tank, because it’s designed to only do a small number of laps. I cut off the end off the original tank, made up some bends on a CNCmachine and got themwelded up to follow the lines of Ron Wood’s [oil-carrying] frame.” According to Jamie, the standard Norton chassis geometry is slap bang in the middle of what is considered an ideal flat track set-up, but this build had to retain the standard 17in wheels. The swingarm is also standard, but with added bracing. The standard Ohlins forks were too long so Jamie opted for shorter, larger-diameter 58mm Ducati Panigale forks which slot into new yokes made from Jamie’s CAD drawings by Fastec Racing in Suffolk, who also did machining work on footpeg mounts and the velocity stacks. Jamie produced a buck for the tank, from which Parker Fabrication in Bournemouth produced the alloy tank. “The inspiration of the Ron Wood bike was the gorgeous red paintwork and tank graphics. We talked with out painters, Image Design, about giving it a modern twist, but they said it was so good we should leave it. The only change is using the current Norton logo.” The engine is standard, but Jamie’s removed the original airbox, so: “we might pick up anything between five and 10bhp.” The exhaust follows the same lines as the Ron Wood bike. It’s all custom made and hand-rolled by Tom at Foundry Motorcycles. The pipes have been given a super hard-wearing ceramic-coated black by Wes at Hi-Spec Coatings in West Sussex. Lasertech Engineering did all the frame welding. The Norton 961 MM Flat Track is priced at ?30,000. “All 12 will be identical except for the number,” says Jamie. “We’ve got 44. We’re keeping this original bike. Customers can have any number, but we won’t use one number twice.”
Top LTI models
Popular Searches
World Encyclopedia of Cars
Copyright 2015. All rights under protection.