World Encyclopedia of Cars
The best old cars, news and reviews about old cars. Stay in touch!

Neoplan AN 435

All Neoplan Photos

Neoplan AN 435 - information: Neoplan AN 435 is a very good car, that was released by "Neoplan" company. We collected the best 10 photos of Neoplan AN 435 on this page.

Brand Name Neoplan
Model Neoplan AN 435
Number of views 51123 views
Model's Rate 8.7 out of 10
Number of images 10 images
Interesting News
  • Own a works racer.

    Aprilia’s RSV4 ismore than a little special. The growlingV4 has lleled drive, it steers with instantaneous accuracy no other canmatch, and there’s a genuine sense of the exotic. This is ue toApriliaUKonlybringing in the swanky RF version, or 2016 gets revisions to its ?hlins shock and a multimedia - this connects toyour phone and lets you tweak the ics corner-by-corner, access fathoms of data, and even see readouts. Truly befuddling. icated track riders and racers will be more excited by the (Factory Works). There are several versions. First is the day bike with specific electronics and maps. Then there’s a e in Superstock race spec; a Superbike with tuned motor, ancy electronics and special dash; and the W-SBK which is a replica of their World Superbike, built to your budget. At EICMA was this look-what-we-can-do R-FW Misano (left), with 230bhp, one-off swingarm and a giddying array of widgets. Aprilia say up to 80,000 euros (?56,160). All come ith tech training and a session with Aprilia’s race test team.
  • NORTON FLAT TRACK.

    This modern Norton dirt track custom is the work of Jamie Ireson’s 72Motorcycles, in collaboration with Norton Motorcycles - a tribute to the 1970s RonWood racing machine that won three Ascot track championship titles and was taken to a National dirt track victory by Alex Jorgenson. Based on a newCommando 961, it was recently launched at Motorcycle Live on the official NortonMotorcycles stand as the first of a limited edition run of 12. Ireson said: “The project started whenmy partnerMerryMichau photographed the 2014 Norton brochure. She toldNorton CEO Stuart Garner that I build custombikes and it went from there. Stuart asked us to come up with some ideas and it turned out that we had the same thoughts on building a custombike based on RonWood’s dirt tracker. Ireson is a design engineer by trade and used his experience gained in the automotive industry to model the bike in CAD before committing to metal. “The one thing we needed to do was lower the bike, and working in CAD with models that Norton supplied allowedme to see what effect that had.” That was November 2014 but it took until June 2015 for the project to take off. “Norton sent me a rolling chassis and engine unit with the only stipulation being that the bike had to be ready forMotorcycle Live at the NEC,” says Jamie. The engine and transmission are standard 961, as is the main frame, but Jamie modified the rear end. He says: “The RonWood bike has a really small oil tank, because it’s designed to only do a small number of laps. I cut off the end off the original tank, made up some bends on a CNCmachine and got themwelded up to follow the lines of Ron Wood’s [oil-carrying] frame.” According to Jamie, the standard Norton chassis geometry is slap bang in the middle of what is considered an ideal flat track set-up, but this build had to retain the standard 17in wheels. The swingarm is also standard, but with added bracing. The standard Ohlins forks were too long so Jamie opted for shorter, larger-diameter 58mm Ducati Panigale forks which slot into new yokes made from Jamie’s CAD drawings by Fastec Racing in Suffolk, who also did machining work on footpeg mounts and the velocity stacks. Jamie produced a buck for the tank, from which Parker Fabrication in Bournemouth produced the alloy tank. “The inspiration of the Ron Wood bike was the gorgeous red paintwork and tank graphics. We talked with out painters, Image Design, about giving it a modern twist, but they said it was so good we should leave it. The only change is using the current Norton logo.” The engine is standard, but Jamie’s removed the original airbox, so: “we might pick up anything between five and 10bhp.” The exhaust follows the same lines as the Ron Wood bike. It’s all custom made and hand-rolled by Tom at Foundry Motorcycles. The pipes have been given a super hard-wearing ceramic-coated black by Wes at Hi-Spec Coatings in West Sussex. Lasertech Engineering did all the frame welding. The Norton 961 MM Flat Track is priced at ?30,000. “All 12 will be identical except for the number,” says Jamie. “We’ve got 44. We’re keeping this original bike. Customers can have any number, but we won’t use one number twice.”
  • MT-10.

    Probably the most eye-catching and exciting motorcycle at EICMA 2015, the sharp and edgy MT-10 is actually a naked version of Yamaha’s awesome YZF R1. It is powered by a reworked 998-cc in-line four with the crossplane crankshaft. Output figures remain shrouded in mystery, unfortunately. The MT-10, like a host of other motorcycles across manufacturers, gets the benefit of ride-by-wire, which is further shored up with selectable power modes, traction control and so on. However, the inertial measurement units of the range-topping R1 will not be seen in the electronics package of the MT-10. Although the bike doesn’t look like it’s headed for India anytime soon, it will surely catch a whole lot of eyeballs and swing them Yamaha’s way if the Indian arm of the MotoGP world championship winning manufacturer do decide to take the bold step.
Top Neoplan models
Popular Searches
World Encyclopedia of Cars
Copyright 2015. All rights under protection.