World Encyclopedia of Cars
The best old cars, news and reviews about old cars. Stay in touch!

Nissan Diesel 200

All Nissan Diesel Photos

Nissan Diesel 200 - information: Nissan Diesel 200 is a very good car, that was released by "Nissan Diesel" company. We collected the best 10 photos of Nissan Diesel 200 on this page.

Brand Name Nissan Diesel
Model Nissan Diesel 200
Number of views 92038 views
Model's Rate 7.3 out of 10
Number of images 10 images
Interesting News
  • China the key to Avista’s future.

    THE future of Buick’s gorgeous Avista concept - and a Holdenbadged version - lies in two extra doors, according to General Motors insiders Wheels spoke to following the car’s Detroit motor show debut. Sources confirmed that a model of a four-door version exists in the GM styling studio and is under serious consideration following its overwhelmingly positive reaction as the star of the show. GM has started work on making a business case for building the car, and a Holden-badged version - including a higher-output HSV model - could be in the mix. GM sources hint the production Avista would likely end up being a four-door coupe designed as a more affordable rival to the Mercedes-Benz CLS, BMW 6 Series Gran Coupe and Audi A7 Sportback. While Buick last year showed off a four-door concept - the Australian-designed Avenir - the four-door Avista coupe would be smaller and sleeker, with more emphasis on proportions and design than rear seat space. The challenge for securing an Avista business case is ensuring enough global demand, and once again right-hand drive production is the big question mark. In the global automotive game, Buick (which sells only in China and North America) tends to fly under the radar. But with sales of 1.25 million vehicles last year - the highest in Buick’s 112 years - it is GM’s second best-selling brand worldwide after Chevrolet. Put that down to China, where it’s the country’s number two brand. China accounts for about 80 percent of total Buick sales, and therefore holds the key to any decision to produce Avista. Although Chinese consumers do not currently buy coupes in significant numbers, Buick and GMC vice-president Duncan Aldred doesn’t necessarily see that as a roadblock to Avista getting the green light for production. “I think we’ve earned the right to have the halo car in the Buick range,” Aldred says. “We’re the premium mainstream brand in China, and there’s great value in us continuing to stretch the brand upwards, even though it may not be massive volume.” “China is important to any Buick,” admits GM design chief Ed Welburn, who says GM’s Chinese product planners have seen the car. While China is now a massive SUV market, Welburn makes the point that Chinese consumers suddenly switched from buying sedans three years ago. “A coupe might be the next big thing.” The Avista concept is based on a mash-up of GM Alpha and Omega components, sharing the Alpha-based Chevrolet Camaro coupe’s 2811mm wheelbase and with nearly identical front and rear tracks. Under the bonnet is a 3.0-litre V6 driving the rear wheels through an eight-speed automatic transmission. It’s the same engine used in the Cadillac CT6. “It’s buildable,” says Cadillac chief engineer Dave Leone. “The business case is the issue.” What helps the business case is that the production version would be built using GM’s Alpha architecture, which underpins Cadillac’s ATS and CTS as well as Camaro. Alpha means the car would not only share components that are already produced in volume, but a number of different variants of the car could also easily be configured. The Avista’s engine bay, for example, will accept GM’s 2.0-litre turbocharged four, and while the 6.2-litre V8 can also be fitted into Alpha, sources say the Avista’s underbonnet layout has not been protected for the larger engine. The eight-speed auto can be swapped for a six-speed manual, and it can be built with all-wheel drive as well as rear-drive. Importantly, it can be built in right-hand drive. That means GM could easily build Opel, Vauxhall and Holden versions of the car, offering powertrains that suit each market, along with different equipment levels and different chassis set-ups. “Think of all the performance hardware in the parts bin,” teases Welburn. An HSV Avista with all-wheel drive and the 346kW, twin-turbo 3.6-litre V6 from the Cadillac ATS-V? It’s possible. “That’s just a good business model,” says Aldred of selling Avista as an Opel. “If you can build a vehicle that’s competing in Europe, North America and China, you’ve pretty much got it covered.” And what about Holden? “Holden’s in the mix,” confirms Aldred, a Brit who was managing director of Vauxhall before taking on the Buick/GMC job, so knows GM’s Australian subsidiary well. “We could do right-hand drive. That investment’s done, though there is an additional expense. I guess you’ve gotta see if there is enough volume in the UK with Vauxhall.” Avista has a lot of enthusiastic supporters inside GM. “It’s gorgeous,” gushed GM chairman and CEO Mary Barra. “I said to Mark [Reuss], ‘We have to find a way of doing this one’.” Lower sales expectations and premium margins mean a fourdoor coupe is perhaps a safer choice as a Buick halo car than a large sedan like the Avenir, which would have had to compete with everything from an S-Class Benz to Hyundai’s new Genesis G90. Even so, GM product planners are wary of committing investment dollars to this notoriously fickle segment. And that’s why there’s a strong faction inside GM that wants to stretch Avista’s wheelbase slightly and add a couple of doors.
  • 2016 YAMAHAS.

    New, More Affordable R1S If there is any one downside to the continued evolution of sportbikes it’s cost: The more advanced production motorcycles become, the more expensive they become as well. And while for some that trade-off is justifiable, there are still those consumers who simply aren’t willing to gut their bank account for the exotic materials and technologies that make modern motorcycles the track weapons they are today. For those consumers, Yamaha has introduced its YZF-R1S, which uses cost-effective materials to cut the suggested retail price of the otherwise stellar R1 by $1,500, to “just” $14,990. If your immediate thought is that Yamaha must have taken everything that made the R1 great and thrown it out the door (electronics included), then rest assured that’s not necessarily the case. Instead, with the R1S, Yamaha has gone in and replaced the titanium connecting rods with steel ones and magnesium outer parts and fasteners like the oil pan and right-side engine covers to aluminum ones. Engine cover bolts are now steel instead of aluminum, while wheels are now manufactured from aluminum instead of magnesium and wrapped in Bridgestone Battlax S20 sport tires instead of the R1/R1M’s trackday-intentioned RS10s. The exhaust header piping is also now made from stainless steel rather than titanium. The overall result of all this material swapping is a 9-pound jump in claimed curb weight. The R1/R1M’s MotoGP-inspired electronics package with power modes, traction control, slide control, launch control, and wheelie control goes untouched, though on the R1S, the quickshifter will come as an option rather than as standard equipment. There are a few other changes, including updates to the ECU that are intended to suit the new engine specification. The switch to steel connecting rods from titanium in the R1S means the redline needed to be reduced, the result being slightly less top-end power than the standard R1. Yamaha has yet to quote any numbers, but in published dyno charts (which are devoid of any numbers), it appears that the R1S’s redline is at 12,500 rpm instead of the R1’s 14,000 rpm, with the power loss at the very top around 5 or so horsepower. The R1S is available in either a red/white/ black color scheme or matte gray motif, and the bike is expected to be available beginning in February. New XSR 900 and Updated FJR 1300 The growing “hipster/caf? racer” culture is catching the attention of the OEMs, with Yamaha and its new XSR900 for 2016 being the latest example. The XSR retains the FZ-09’s excellent 847cc crossplane three-cylinder engine and Controlled Filling Die-Cast aluminum frame and swingarm with adjustable KYB suspension but adds styling components and details that harken back to the “heritage, authenticity, and simplicity” of the sporting motorcycles from the ’70s and ’80s. The XSR gets the FZ’s three YCC-T (Yamaha Chip Controlled Throttle) riding modes, but it also gets a two-level (plus off) traction control system as well as ABS as standard equipment. An assist/ slipper clutch eases lever effort by a claimed 20 percent while also helping to smooth out downshifts. Everything else mechanically (save for suspension settings) is basically identical to the FZ. Ergonomically, the XSR’s 32.7-inch seat height is 15mm higher than the FZ’s, and the rider’s seating position is moved 50mm rearward to make for a slightly more aggressive riding posture. Styling is the XSR’s main focus. There’s plenty of nice metal bracketry and components where plastic or other materials would normally be used. For example, the nice-looking fuel tank cover on the matte gray/ aluminum version (there’s also one in the 60th Anniversary yellow/black traditional Yamaha motif) is a brushed-aluminum piece that Yamaha says has an actual hand-buffed finish. A single round halogen headlight is held by aluminum brackets, and a round LED taillight mounted atop a metal (aluminum) fender replicate the look of the ’70s caf? racer. The seat features burgundy-colored faux suede leather panels and red stitching. The single round instrument gauge recalls the older style in shape, but in function it jumps to present-day technology with a full LCD info panel. All told, the XSR900 comes in 16 pounds heavier than the FZ-09 according to Yamaha, at a claimed 430 pounds full of fuel. The matte gray/aluminum XSR900 will be available in April, while the 60th Anniversary version will be available slightly later this year in May. Also new for 2016 from Yamaha is the latest FJR1300, in both A (standard) and ES (Electronic Suspension) models. The biggest change for both editions is a six-speed transmission replacing the old five-speed, with a slipper/assist clutch. A new LED headlight and taillight along with slightly revised bodywork complete the revisions for the A model, while the ES gets all that plus a new “lean-angle sensitive” cornering LED light setup that uses three LEDs on each side above the quad-element headlights that light up progressively as the bike leans to more effectively illuminate the road ahead in corners. The 2016 FJR will be available in March; no prices for either the new FJR1300 or XSR900 were available at press time.
  • Tornado 302.

    This fully faired version of the TnT 300, which is already available in India, is indeed headed for our shores. DSK Benelli top brass say that the bike will be seen at the upcoming Auto Expo 2016 in Delhi and will be launched for retail purchases in the new year. The bike is powered by the familiar 300-cc liquid-cooled parallel twin. Specs say that 34.5 PS and 27 Nm is available at the twist of your wrist. Under the fairing is Benelli’s trestle frame, which has already proven itself capable in the TnT 300. The bike gets 41-mm upside down (USD) front forks and a monoshock at the rear.
Top Nissan Diesel models
Popular Searches
World Encyclopedia of Cars
Copyright 2015. All rights under protection.