World Encyclopedia of Cars
The best old cars, news and reviews about old cars. Stay in touch!

Nysa 501 OW

All Nysa Photos

Nysa 501 OW - information: Nysa 501 OW is a very good car, that was released by "Nysa" company. We collected the best 10 photos of Nysa 501 OW on this page.

Brand Name Nysa
Model Nysa 501 OW
Number of views 53217 views
Model's Rate 8.8 out of 10
Number of images 10 images
Interesting News
  • V7 II.

    Moto Guzzi launched the new generation of the V7 at EICMA 2015, called V7 II, six years after the re-launch of the iconic motorcycle. Although a classic in its visual appeal, the V7 II is a modern motorcycle loaded with modern technologies. The bike is powered by Moto Guzzi’s new 744-cc air-cooled engine that puts out 48 PS at 6,200 RPM and 60 Nm of maximum torque at a rather low 2,800 RPM. Transmission is via a new six-speed gearbox as opposed to the previous V7’s five-speed unit. The clutch, too, has been improved with better linkages and modifications to the lever and cable in order to achieve a softer action and an even release. The bike should be headed to India soon and, once launched here, should make for an interesting choice in that segment.
  • PorsChe Goes tesla HUntinG.

    The green light has been given to the Porsche Mission E project, following overwhelming response to its debut at the Frankfurt motor show last September. Due to be launched at the end of the decade, the newcomer will be the first 100 per cent electrically powered Porsche in the company’s history. More than 10,000 jobs will be created in Stuttgart, with in excess of half a billion pounds set to be invested, including a new assembly line and paint shop. The current engine factory will be expanded to allow production of electric motors, and the company’s research and development in Weissach will see extra cash ploughed into it. If the production car remains true to the motor show concept car, it will be a four-door, four-seat vehicle, with a maximum power output of more than 590bhp. Acceleration to 62mph will be under 3.5 seconds, and the car will have a driving range of more than 500 miles. It’s intended that the battery pack will be rechargeable back up to 80 per cent of its capacity in just 15 minutes, using a specially developed 800- volt charger unit. Wireless inductive charging will also be an optional extra.
  • NORTON FLAT TRACK.

    This modern Norton dirt track custom is the work of Jamie Ireson’s 72Motorcycles, in collaboration with Norton Motorcycles - a tribute to the 1970s RonWood racing machine that won three Ascot track championship titles and was taken to a National dirt track victory by Alex Jorgenson. Based on a newCommando 961, it was recently launched at Motorcycle Live on the official NortonMotorcycles stand as the first of a limited edition run of 12. Ireson said: “The project started whenmy partnerMerryMichau photographed the 2014 Norton brochure. She toldNorton CEO Stuart Garner that I build custombikes and it went from there. Stuart asked us to come up with some ideas and it turned out that we had the same thoughts on building a custombike based on RonWood’s dirt tracker. Ireson is a design engineer by trade and used his experience gained in the automotive industry to model the bike in CAD before committing to metal. “The one thing we needed to do was lower the bike, and working in CAD with models that Norton supplied allowedme to see what effect that had.” That was November 2014 but it took until June 2015 for the project to take off. “Norton sent me a rolling chassis and engine unit with the only stipulation being that the bike had to be ready forMotorcycle Live at the NEC,” says Jamie. The engine and transmission are standard 961, as is the main frame, but Jamie modified the rear end. He says: “The RonWood bike has a really small oil tank, because it’s designed to only do a small number of laps. I cut off the end off the original tank, made up some bends on a CNCmachine and got themwelded up to follow the lines of Ron Wood’s [oil-carrying] frame.” According to Jamie, the standard Norton chassis geometry is slap bang in the middle of what is considered an ideal flat track set-up, but this build had to retain the standard 17in wheels. The swingarm is also standard, but with added bracing. The standard Ohlins forks were too long so Jamie opted for shorter, larger-diameter 58mm Ducati Panigale forks which slot into new yokes made from Jamie’s CAD drawings by Fastec Racing in Suffolk, who also did machining work on footpeg mounts and the velocity stacks. Jamie produced a buck for the tank, from which Parker Fabrication in Bournemouth produced the alloy tank. “The inspiration of the Ron Wood bike was the gorgeous red paintwork and tank graphics. We talked with out painters, Image Design, about giving it a modern twist, but they said it was so good we should leave it. The only change is using the current Norton logo.” The engine is standard, but Jamie’s removed the original airbox, so: “we might pick up anything between five and 10bhp.” The exhaust follows the same lines as the Ron Wood bike. It’s all custom made and hand-rolled by Tom at Foundry Motorcycles. The pipes have been given a super hard-wearing ceramic-coated black by Wes at Hi-Spec Coatings in West Sussex. Lasertech Engineering did all the frame welding. The Norton 961 MM Flat Track is priced at ?30,000. “All 12 will be identical except for the number,” says Jamie. “We’ve got 44. We’re keeping this original bike. Customers can have any number, but we won’t use one number twice.”
Top Nysa models
Popular Searches
World Encyclopedia of Cars
Copyright 2015. All rights under protection.