World Encyclopedia of Cars
The best old cars, news and reviews about old cars. Stay in touch!

Oakland Sedan

All Oakland Photos

Oakland Sedan - information: Oakland Sedan is a very good car, that was released by "Oakland" company. We collected the best 11 photos of Oakland Sedan on this page.

Brand Name Oakland
Model Oakland Sedan
Number of views 49957 views
Model's Rate 9.3 out of 10
Number of images 11 images
Interesting News
  • NORTON FLAT TRACK.

    This modern Norton dirt track custom is the work of Jamie Ireson’s 72Motorcycles, in collaboration with Norton Motorcycles - a tribute to the 1970s RonWood racing machine that won three Ascot track championship titles and was taken to a National dirt track victory by Alex Jorgenson. Based on a newCommando 961, it was recently launched at Motorcycle Live on the official NortonMotorcycles stand as the first of a limited edition run of 12. Ireson said: “The project started whenmy partnerMerryMichau photographed the 2014 Norton brochure. She toldNorton CEO Stuart Garner that I build custombikes and it went from there. Stuart asked us to come up with some ideas and it turned out that we had the same thoughts on building a custombike based on RonWood’s dirt tracker. Ireson is a design engineer by trade and used his experience gained in the automotive industry to model the bike in CAD before committing to metal. “The one thing we needed to do was lower the bike, and working in CAD with models that Norton supplied allowedme to see what effect that had.” That was November 2014 but it took until June 2015 for the project to take off. “Norton sent me a rolling chassis and engine unit with the only stipulation being that the bike had to be ready forMotorcycle Live at the NEC,” says Jamie. The engine and transmission are standard 961, as is the main frame, but Jamie modified the rear end. He says: “The RonWood bike has a really small oil tank, because it’s designed to only do a small number of laps. I cut off the end off the original tank, made up some bends on a CNCmachine and got themwelded up to follow the lines of Ron Wood’s [oil-carrying] frame.” According to Jamie, the standard Norton chassis geometry is slap bang in the middle of what is considered an ideal flat track set-up, but this build had to retain the standard 17in wheels. The swingarm is also standard, but with added bracing. The standard Ohlins forks were too long so Jamie opted for shorter, larger-diameter 58mm Ducati Panigale forks which slot into new yokes made from Jamie’s CAD drawings by Fastec Racing in Suffolk, who also did machining work on footpeg mounts and the velocity stacks. Jamie produced a buck for the tank, from which Parker Fabrication in Bournemouth produced the alloy tank. “The inspiration of the Ron Wood bike was the gorgeous red paintwork and tank graphics. We talked with out painters, Image Design, about giving it a modern twist, but they said it was so good we should leave it. The only change is using the current Norton logo.” The engine is standard, but Jamie’s removed the original airbox, so: “we might pick up anything between five and 10bhp.” The exhaust follows the same lines as the Ron Wood bike. It’s all custom made and hand-rolled by Tom at Foundry Motorcycles. The pipes have been given a super hard-wearing ceramic-coated black by Wes at Hi-Spec Coatings in West Sussex. Lasertech Engineering did all the frame welding. The Norton 961 MM Flat Track is priced at ?30,000. “All 12 will be identical except for the number,” says Jamie. “We’ve got 44. We’re keeping this original bike. Customers can have any number, but we won’t use one number twice.”
  • BIG BIKE VS. SMALL BIKE.

    We see it quite often at the racetrack, especially in club races where classes are mixed: Rider on small bike passes rider on big bike in seemingly every corner, only to be passed back right away on the next straight. Even if the power difference is not that great between the two bikes, the contrast between corner speed and straightaway speed of the two bikes becomes magnified as each bike is ridden to maximize its advantages. The reality of the situation is that the outright maximum cornering speed between any two bikes is not that significantly different, provided both are on similar tires. If the tires are similar, both bikes should be capable of the same lateral acceleration (limited by the friction coefficient of the tires) and corner speed. Why do we see such a contrast in how the bikes are ridden? On an underpowered bike, the quickest way around the track is to maximize corner speed, in turn getting onto each straight with as much speed as possible. This is accomplished by completing the corner with as large an arc as possible, which converts lateral acceleration into maximum corner speed. For a typical single-radius corner, this means entering as wide as possible to maximize entry speed, turning in to the apex with little trail- braking, and keeping the bike at maximum lean with a constant radius until the very exit of the corner. In contrast, the quickest lap times on a more powerful bike are usually found by maximizing acceleration onto each straight and taking advantage of that power; this is achieved by sacrificing some corner speed to pick the bike up and apply the throttle earlier at the exit. For that same single-radius corner, this means a tighter entry, more trail-braking to a slightly later apex, with a tighter arc and less corner speed to get the bike up off the side of the tire as quickly as possible. As we found out in our displacement test last year where we compared the Yamaha YZF-R6, Suzuki GSX-R750, and Kawasaki ZX-10R, it’s not so much that the smaller bikes have a handling advantage over the bigger bikes but rather it’s how each bike is ridden to play to its strength or weakness in the power department. Using data from our AiM Solo GPS lap timer, we could see differences in line and cornering speeds between the three bikes, just as you would expect given the horsepower of each. While a few horsepower here or there might not seem like it should impact line choice signifi- cantly, in practice even a small difference can significantly change how a particular corner or series of corners is negotiated. And the contrast between a lightweight bike and a literbike can be astonishing: We’ve encountered certain corners where the entry line is several feet different on an SV650 than it is on a 1000, for an example. Finding the optimum line to match the power of your bike does require some experimentation. The wide radius and high corner speed that less powerful bikes require typically brings with it a higher risk of a high-side crash in the middle of the corner just as the throttle is opened, and the safer option is to start with the tighter entry and lower corner speed of the big-bike line and work from there, adding more corner speed and a wider entry with practice. If you are looking at sector times on data, don’t forget to factor in any time gained or lost on the succeeding straight, which may or may not offset time saved in the corner itself. Given the contrast in lines between different bikes, the key point to remember is that the optimum line for your bike may be very different from the bike in front of you, and it’s quite often a mistake to blindly follow another rider at the track. Even if you are riding the same model of bike, the power difference may be enough that you can take advantage of a different line to be quicker, and that line may work to a further advantage when it comes time to make a pass. When you ride at the track, what bike you are on will at least in part determine what lines you should be taking, and you should try different options with that in mind. And if you change bikes and move to a more or less powerful machine- or even make modifications to the same bike for more power-know that the lines you had been using for years might need to be altered appropriately.
  • RECREATING HISTORY.

    A stunningMoto Guzzi V8 works racer replica looks certain to steal the show at Coys sale at theMCNLondonMotorcycle Show at Excel on February 13. The bike was built in the early 2000s by ex-factory technicians with access to original drawings and spares to use as patterns to make new components. Coys haven’t provided an estimate but, with only two original V8 racers existing, the parade-ready replica should attract a three-figure sum. Other bikes from the same Italian collection to be offered at Excel include a gorgeous 1957 Ducati 125cc Bialbero racer (estimate ?65,000-70,000), a rare 1955 100cc Cecatto Bialbero racer (?29,000-35,000), a 1938 250cc Benelli Bialbero race bike (?48,000-52,000) and a 1931 1300cc Indian Type 402 four, fully restored in 2010 with minimal mileage since (?55,000-65,000). Entries for the capital’s only motorcycle-only sale scheduled for 2016 are still open and the catalogue - which will be available on January 25 - closes on January 19. Entry fees are ?350 per bike and buyers’ and sellers’ commission is set at 10% plus VAT. Over 100 lots are promised for the sale, which starts at 2.30pm on Saturday February 13 (viewing from February 12). Potential vendors contact Anthony Godin (07854 213928 or 0208 614 7888).
Top Oakland models
Popular Searches
World Encyclopedia of Cars
Copyright 2015. All rights under protection.