World Encyclopedia of Cars
The best old cars, news and reviews about old cars. Stay in touch!

Venturi Atlantique

All Venturi Photos

Venturi Atlantique - information: Venturi Atlantique is a very good car, that was released by "Venturi" company. We collected the best 12 photos of Venturi Atlantique on this page.

Brand Name Venturi
Model Venturi Atlantique
Number of views 19971 views
Model's Rate 7.8 out of 10
Number of images 12 images
Interesting News
  • 2016 YAMAHAS.

    New, More Affordable R1S If there is any one downside to the continued evolution of sportbikes it’s cost: The more advanced production motorcycles become, the more expensive they become as well. And while for some that trade-off is justifiable, there are still those consumers who simply aren’t willing to gut their bank account for the exotic materials and technologies that make modern motorcycles the track weapons they are today. For those consumers, Yamaha has introduced its YZF-R1S, which uses cost-effective materials to cut the suggested retail price of the otherwise stellar R1 by $1,500, to “just” $14,990. If your immediate thought is that Yamaha must have taken everything that made the R1 great and thrown it out the door (electronics included), then rest assured that’s not necessarily the case. Instead, with the R1S, Yamaha has gone in and replaced the titanium connecting rods with steel ones and magnesium outer parts and fasteners like the oil pan and right-side engine covers to aluminum ones. Engine cover bolts are now steel instead of aluminum, while wheels are now manufactured from aluminum instead of magnesium and wrapped in Bridgestone Battlax S20 sport tires instead of the R1/R1M’s trackday-intentioned RS10s. The exhaust header piping is also now made from stainless steel rather than titanium. The overall result of all this material swapping is a 9-pound jump in claimed curb weight. The R1/R1M’s MotoGP-inspired electronics package with power modes, traction control, slide control, launch control, and wheelie control goes untouched, though on the R1S, the quickshifter will come as an option rather than as standard equipment. There are a few other changes, including updates to the ECU that are intended to suit the new engine specification. The switch to steel connecting rods from titanium in the R1S means the redline needed to be reduced, the result being slightly less top-end power than the standard R1. Yamaha has yet to quote any numbers, but in published dyno charts (which are devoid of any numbers), it appears that the R1S’s redline is at 12,500 rpm instead of the R1’s 14,000 rpm, with the power loss at the very top around 5 or so horsepower. The R1S is available in either a red/white/ black color scheme or matte gray motif, and the bike is expected to be available beginning in February. New XSR 900 and Updated FJR 1300 The growing “hipster/caf? racer” culture is catching the attention of the OEMs, with Yamaha and its new XSR900 for 2016 being the latest example. The XSR retains the FZ-09’s excellent 847cc crossplane three-cylinder engine and Controlled Filling Die-Cast aluminum frame and swingarm with adjustable KYB suspension but adds styling components and details that harken back to the “heritage, authenticity, and simplicity” of the sporting motorcycles from the ’70s and ’80s. The XSR gets the FZ’s three YCC-T (Yamaha Chip Controlled Throttle) riding modes, but it also gets a two-level (plus off) traction control system as well as ABS as standard equipment. An assist/ slipper clutch eases lever effort by a claimed 20 percent while also helping to smooth out downshifts. Everything else mechanically (save for suspension settings) is basically identical to the FZ. Ergonomically, the XSR’s 32.7-inch seat height is 15mm higher than the FZ’s, and the rider’s seating position is moved 50mm rearward to make for a slightly more aggressive riding posture. Styling is the XSR’s main focus. There’s plenty of nice metal bracketry and components where plastic or other materials would normally be used. For example, the nice-looking fuel tank cover on the matte gray/ aluminum version (there’s also one in the 60th Anniversary yellow/black traditional Yamaha motif) is a brushed-aluminum piece that Yamaha says has an actual hand-buffed finish. A single round halogen headlight is held by aluminum brackets, and a round LED taillight mounted atop a metal (aluminum) fender replicate the look of the ’70s caf? racer. The seat features burgundy-colored faux suede leather panels and red stitching. The single round instrument gauge recalls the older style in shape, but in function it jumps to present-day technology with a full LCD info panel. All told, the XSR900 comes in 16 pounds heavier than the FZ-09 according to Yamaha, at a claimed 430 pounds full of fuel. The matte gray/aluminum XSR900 will be available in April, while the 60th Anniversary version will be available slightly later this year in May. Also new for 2016 from Yamaha is the latest FJR1300, in both A (standard) and ES (Electronic Suspension) models. The biggest change for both editions is a six-speed transmission replacing the old five-speed, with a slipper/assist clutch. A new LED headlight and taillight along with slightly revised bodywork complete the revisions for the A model, while the ES gets all that plus a new “lean-angle sensitive” cornering LED light setup that uses three LEDs on each side above the quad-element headlights that light up progressively as the bike leans to more effectively illuminate the road ahead in corners. The 2016 FJR will be available in March; no prices for either the new FJR1300 or XSR900 were available at press time.
  • Audi’s electrified future.

    The introduction of mild hybrids to Audi’s model range is set to edge efficiency ever closer to the kind of economy figures enjoyed by TDI owners. But it doesn’t mean the death of the diesel engine, as the introduction of cutting edge technology can be paired to both TDI diesel and TFSI petrol engines. Audi says that within ten years, its entire model range will feature the technology. The key elements of the new system are an 11 Ah capacity lithium-ion battery pack and belt starter generator, with the latter replacing the current starter motor. Coasting becomes possible from around 9mph upwards, so that if the driver takes their foot off the accelerator, the car will coast along for a short time with the engine off, saving fuel. It’s possible to recuperate up to 5kW (7bhp), with the generator returning that power, reducing fuel usage and boosting economy as a result. And while this system can be integrated into current 12-volt systems, Audi is on the verge of announcing that it will put a new 48-volt system into production, with a capacity of harnessing 12kW (16bhp), that will allow coasting for up to 30 seconds, delivering even better efficiency compared to the 12-volt system. The company first gave a glimpse at the technology in the Prologue Concept car last year at the Los Angeles motor show. Other benefits of the introduction of a 48-volt electrical system includes the ability to have much smaller cable cross sections, reducing the weight of the wiring harness, and because it has four times the power, there’s opportunities to add additional innovative technology for the suspension and drivetrain. Further into the future, Audi’s engineers plan to convert the auxiliary systems, like pumps, superchargers for the engine, transmission and air conditioning system to 48 volts. Today these are driven hydraulically or by the engine, but in the future they will be powered by electricity and lighter and more compact. Audi will soon announce an electromechanical active roll stabilisation system, which features an electric motor and a three-stage planetary gearbox that separates the two halves of the stabiliser from each other. For relaxed and comfortable driving, the two halves are decoupled, resulting in cossetting ride comfort. For the sportier driver, the tubes are interconnected and twist against each other, delivering a tauter, more dynamic ride, and less roll when cornering. The front and rear stabilisers can also be adjusted independently allowing even greater degrees of fine tuning. The system is also capable of harnessing energy, and the motor can act as a generator, converting it to electrical energy. But Audi’s engineers are already looking at a second, more advanced project using the 48-volt setup, though it is still in the very early prototype stage. Being developed under the working title of eROT, an electromechanical rotary damper replaces today’s hydraulic item. The system isn’t too far apart from the active roll stabilisation arrangement in terms of basic principles, but a strong lever arm absorbs all of the forces that occur on a bumpy road, and via a series of gears, the force is transmitted into an electric motor, which then converts it to electricity. Recuperation is, on average, around 150 watts on an average road, with a freshly resurfaced road generating as little as 3 watts, while a badly maintained country lane may generate as much as 613 watts. Over a cross section of different roads, CO2 emissions savings could be as much as 3g/ km or four to five mpg.
  • Tuono V4 1100 RR.

    The venerable Tuono’s front end has been revised to offer better wind protection and has, at the same time, been made to shed 1.5 kg. The seat height has been lowered by 15 mm and the handlebars are new too. Aprilia say that these small changes make the Tuono great bikes to ride.
Top Venturi models
Popular Searches
World Encyclopedia of Cars
Copyright 2015. All rights under protection.